Carrier 45MBDAQ - Page 13

45MBDAQ: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
13
SILENCE
FP function
O
O
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function.
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Boost or Clean button or start sleep
feature while operating will cancel silence function.
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F .
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
Press this button 2 times under HEAT Mode and setting temperature of 16 C/60 F to activate the
FP function. Press On/Off, Mode, Fan and Temp. button
or start sleep feature while operating will
cancel this function.
Press On/Off, Mode,Swing or clean button while operating will cancel
this function.
Note: This function is for heat pump air conditioner only.
Note: This function is
is available under cool, Fan and Dry mode only.
2
2s
BREEZE AWAY function
Press this button to start/stop Breeze away function. This function avoids
direct air flow blowing on the body and makes you feel indulging in silky
coolness.