45MBDAQ: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
9
Fig. 3 —Display Panel
MANUAL button: This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The system will then turn to AUTO after it has cooled with a high
wind speed for 30 minutes. The remote control will be disabled during this operation.
OFF mode: When the display panel is turned OFF, the unit turns off and the remote control is re-enabled.
Table 6 — Pipe Specification
Table 7 — Indoor Model Numbers
NAME MODEL
SPECIFICATION
REMARK
LIQUID SIDE GAS SIDE
Connecting Pipe Assembly
06k 6.35mm(1/4in) 9.52mm(3/8in)
Parts must be purchased
separately. Consult your
dealer about the proper pipe
size of the unit you
purchased
09K/12K 6.35mm(1/4in) 9.52mm(3/8in)
18K 6.35mm(1/4in) 12.7mm(1/2in)
24K 9.52mm(3/8in) 15.9mm(5/8in)
36K 9.52mm(3/8in) 19mm(3/4in)
48K 9.52mm(3/8in) 19mm(3/4in)
58K 9.52mm(3/8in) 19mm(3/4in)
SYSTEM TONS BTUH VOLTAGE MODEL
0.5 6,000 208/230-1 45MBDAQ06XA3
0.75/1.0 9,000/12,000 208/230-1 45MBDAQ12XA3
1.5 18,000 208/230-1 45MBDAQ18XA3
0.75/1.0 9,000/12,000 208/230-1 45MBDAQ12XH3
1.5 18,000 208/230-1 45MBDAQ18XH3
2.0 24,000 208/230-1 45MBDAQ24XH3
3.0 36,000 208/230-1 45MBDAQ36XH3
4.0 48,000 208/230-1 45MBDAQ48XH3
4.8 58,000 208/230-1 45MBDAQ58XH3
To Next Page
Loading...
