Carrier 48LC Series - Page 142

142
VENTCURV
(cont)
Min Pos - User Speed 3 0 to 100 % MP_USPD3
User Min Pos Pnt 1 Valid Yes/No MP_UPT1
User Min Pos Pnt 2 Valid Yes/No MP_UPT2
User Min Pos Pnt 3 Valid Yes/No MP_UPT3
Min Pos - Default Pos 1 0 to 100 % MP_DPOS1
Min Pos - Default Pos 2 0 to 100 % MP_DPOS2
Min Pos - Default Pos 3 0 to 100 % MP_DPOS3
Min Pos - Default Speed 1 0 to 100 % MP_DSPD1
Min Pos - Default Speed 2 0 to 100 % MP_DSPD2
Min Pos - Default Speed 3 0 to 100 % MP_DSPD3
Econ Min at Max Fanspeed 0 to 100 % MINP_MAX
Min Pos Curve - Pos 1 0 to 100 % MP_POS1
Min Pos Curve - Pos 2 0 to 100 % MP_POS2
Min Pos Curve - Pos 3 0 to 100 % MP_POS3
IDF Maximum Fan Speed 80 to 100 % SPEEDMAX
Min Pos Curve - Speed 1 0 to 100 % MP_SPD1
Min Pos Curve - Speed 2 0 to 100 % MP_SPD2
Min Pos Curve - Speed 3 0 to 100 % MP_SPD3
IAQ DCV Curve Offset 0 to 100 % IAQ_OFFS
IAQ Position at Max Fan 0 to 100 % IAQMINP
IAQ DCV Curve - Pos 1 0 to 100 % AQ_POS1
IAQ DCV Curve - Pos 2 0 to 100 % AQ_POS2
IAQ DCV Curve - Pos 3 0 to 100 % AQ_POS3
IDF Maximum Fan Speed 80 to 100 % SPEEDMAX
IAQ DCV Curve - Speed 1 0 to 100 % AQ_SPD1
IAQ DCV Curve - Speed 2 0 to 100 % AQ_SPD2
IAQ DCV Curve - Speed 3 0 to 100 % AQ_SPD3
IAQ Purge Curve Offset 0 to 100 % AQP_OFFS
IAQ Purge Pos at Max IDF 0 to 100 % IAQPMAX
IAQ Purge Curve - Pos 1 0 to 100 % AQP_POS1
IAQ Purge Curve - Pos 2 0 to 100 % AQP_POS2
IAQ Purge Curve - Pos 0 to 100 % AQP_POS3
IDF Maximum Fan Speed 80 to 100 % SPEEDMAX
IAQ Purge Curve - Speed 1 0 to 100 % AQP_SPD1
IAQ Purge Curve - Speed 2 0 to 100 % AQP_SPD2
IAQ Purge Curve - Speed 3 0 to 100 % AQP_SPD3
LINKDATA
Linkage CCN Element # xxx LNK_SUPE Forcible
Linkage CCN Bus Number xxx LNK_SUPB Forcible
Block No: in Master Zone 1 to 8 LNK_SUPB Forcible
Average Occup. Heat Stp. xxx.x °F LNK_SUPB Forcible
Average Occup. Cool Stp. xxx.x °F LNK_OCSP Forcible
Average Unocc. Heat Stp. xxx.x °F LNK_UHSP Forcible
Average Unocc. Cool Stp. xxx.x °F LNK_UHSP Forcible
Average Zone Temperature xxx.x °F LNK_AZT Forcible
Average Occup. Zone Temp xxx.x °F LNK_AOZT Forcible
Linkage Occupied Request
0=Unocc,
1=Occupied,
2=Disabled
LNK_OCC Forcible
Linkage Next Occ Day text string LNEXTOCD
Linkage Next Occ Time hh:mm LNEXTOCT
Linkage Last Unocc Day text string LNEXTUOD
Linkage Next Unocc Time hh:mm LNEXTUCT
Linkage Last Unocc Day text string LLASTUOD
Linkage Last Unocc Time hh:mm LLASTUCT
Linkage Active Yes/No LNK_ACT Forcible
Linkage Equipment Mode Yes/No LNK_MODE Forcible
Table T — MAINTENANCE TABLES (cont)
TABLE DISPLAY NAME RANGE UNITS POINT NAME
WRITE
STATUS
APPENDIX D — SYSTEMVU™ CONTROLLER CCN TABLES