Carrier 50ZH Series - Available Unit Accessories; Accessory Controls and Features; Accessory Electric Heater Usage

....... ?940 ...........................4080 ..............
J 57} [16 06]
j o
! x; lii{° )i°
t ?'6 tj )/,
REAR VIEW _ o
DiC 1 3PE_ _gs
REQUIRED CLEARANCE TO COMBUSTIBLE MATL
INCHES [mm]
TOP OF UNIT ......................................................................................... 0
DUCT SIDE OF UNIT ............................................................................. 0
SIDE OPPOSITE DUCTS ...................................................................... 0
BOTTOM OF UNIT ................................................................................. 0
NEC. REQUIRED CLEARANCES.
INCHES mm
BETWEEN UN TS, POWER ENTRY S DE .................................... 42.00 066.8
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.01
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE ......................... 42.00 [1066.81
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
INCHES [mm]
CONDENSER COIL ACCESS SIDE .............................................. 30.00 [762.0]
POWER ENTRY SIDE .................................................................... 30.00 [762.0]
(EXCEPT FOR NEC REOUIREMENTS)
UNIT TOP ....................................................................................... 48.00 [1219.2]
SIDE OPPOSITE DUCTS .............................................................. 30.00 [762.0]
LEGEND
NEC - National Electrical Code
NOTES:
1. Clearances must be maintained to prevent recirculation of air from outdoor-
fan discharge, with the exception of the condenser coil (36.00 in [914.0 mm]. A
removable fence or barricade requires no clearance.
2. Dimensions are in inches. Dimensions in [ ] are in millimeters.
CONDENSER ,
cC
12950
{5098]
5o_iot,! O[ UNil
V'-P()_"A IOR \
\!l t
Ii
8i2
[iI (),A:[R, /q ' q _Os
COMPRESSOR PANEL
\
[I.20]
LEFT SIDE VIEW
FRONTVIEW [,0_o]
RIGHT SIDE VIEW
[250]
C00003
UNIT
50ZH036
50ZH042
50ZH048
ELECTRICAL CHARACTERISTICS
UNIT WEIGHT
Lb Kg X Y
208/230-3-80,
480-3-80 277 128 14.0 (388) 19.0 (483)
208/230-3-80,
480-3-80 295 134 14.0 (388) 19.0 (483)
208/230-3-80, 328 149 14.0 (388) 19.0 (483)
480-3-80
Fig. 3--Unit Base Dimensions--50ZH036-048
CENTER OF GRAVITY IN. (MM)
Z
15.0 (381)
15.0 (381)
15.0 (381)