Do you have a question about the Carrier 58MSA and is the answer not in the manual?
Details on installing the furnace in an upflow airflow configuration.
Details on installing the furnace in a downflow airflow configuration.
Instructions for installing the furnace in horizontal orientations.
General guidelines for selecting the furnace installation location.
Safety considerations for installing the furnace in hazardous locations.
Provisions for adequate air supply for combustion and ventilation.
Air supply requirements for unconfined installation spaces.
Air supply requirements for confined installation spaces.
Procedures for installing the furnace in upflow and downflow orientations.
Procedures for installing the furnace in horizontal orientations.
Instructions for connecting the supply air ductwork to the furnace.
Instructions for connecting the return air ductwork to the furnace.
Instructions for making 115-volt electrical connections to the furnace.
Instructions for making 24-volt thermostat and control wiring connections.
Procedure for removing old furnaces from shared venting systems.
Guidelines for installing combustion-air and vent piping.
Instructions for installing and relocating the condensate trap.
Measures to protect the condensate drain system from freezing.
Step-by-step description of the furnace operation during heating.
Step-by-step description of the furnace operation during cooling.
Procedure to prime the condensate trap with water before operation.
Instructions for adjusting the gas input rate based on altitude.
Procedure to verify the operation of the primary limit control.
Procedure to verify the operation of the pressure switch.
Details on installing the furnace in an upflow airflow configuration.
Details on installing the furnace in a downflow airflow configuration.
Instructions for installing the furnace in horizontal orientations.
General guidelines for selecting the furnace installation location.
Safety considerations for installing the furnace in hazardous locations.
Provisions for adequate air supply for combustion and ventilation.
Air supply requirements for unconfined installation spaces.
Air supply requirements for confined installation spaces.
Procedures for installing the furnace in upflow and downflow orientations.
Procedures for installing the furnace in horizontal orientations.
Instructions for connecting the supply air ductwork to the furnace.
Instructions for connecting the return air ductwork to the furnace.
Instructions for making 115-volt electrical connections to the furnace.
Instructions for making 24-volt thermostat and control wiring connections.
Procedure for removing old furnaces from shared venting systems.
Guidelines for installing combustion-air and vent piping.
Instructions for installing and relocating the condensate trap.
Measures to protect the condensate drain system from freezing.
Step-by-step description of the furnace operation during heating.
Step-by-step description of the furnace operation during cooling.
Procedure to prime the condensate trap with water before operation.
Instructions for adjusting the gas input rate based on altitude.
Procedure to verify the operation of the primary limit control.
Procedure to verify the operation of the pressure switch.
Loading...