1
59SP5A
Performance™ Boost, Single---Stage
4 --- W a y M u l t i p o i s e
Co ndensing Gas Furnac e
Series 100
Product Data
A11263
The 59SP5A Multipoise Performance Boost Condensing Gas
Furnace features SEER--boosting year--round electrical efficiency
when paired with a compatible condensing unit. Energy efficiency
is at the heart of this furnace with up to 96.5% AFUE gas
efficiency and the electrically--efficient basic ECM blower motor.
This gas furnace also features 4--way multipoise installation
flexibility, and is available in six model sizes. The 59SP5A can be
vented for direct vent/two--pipe, ventilated combustion air, or
single--pipe applications. All units meet California Air Quality
Management District emission requirements, are design certified in
Canada, and are certified for mobile/manufactured home use.
STANDARD FEATURES
S Quiet operation. Compare for yourself at HVACpartners.com.
S Most sizes meet ENERGY STARR Version 4.0 criteria for gas
furnaces: 95+ AFUE; AMACF electrical rating; 2% or less
cabinet airflow leakage. See table on Page 2.
S High--efficiency basic ECM multiple--speed blower motor for
electrically efficient operation all year long in heating, cooling
and continuous fan operation.
S Humidistat Control compatible; dehumidification input for
better comfort.
S SmartEvap technology helps control humidity levels in the
home when used with a compatible humidity control system.
S ComfortFan technology allows control of continuous fan
speed from a compatible thermostat.
S Ideal height 35” (889 mm) cabinet: short enough for taller coils,
but still allows enough room for service.
S Silicon Nitride Power Heat Hot Surface Igniter.
S External Media Filter Cabinet included.
S 4--way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow and optional venting
through--the--cabinet downflow venting capability.
S Single--speed inducer motor, and single--stage gas valve.
S Self diagnostics with SuperBrite LED.
S Approved for Twinning applications with accessory kit (60--14
through 120--22 models, only).
S Approved for Manufactured Housing/Mobile Home applications
with MH accessory kit.
S Adjustable blower speed for heating, cooling and continuous fan
S Aluminized--steel primary heat exchanger.
S Stainless--steel condensing secondary heat exchanger.
S Propane convertible (see Accessory list).
S Factory--configured ready for upflow applications.
S Fully--insulated casing including blower section.
S Convenient Air Purifier and Humidifier connections.
S Direct--vent/sealed combustion, single--pipe venting or
ventilated combustion air.
S Installation flexibility: (sidewall or vertical vent).
S Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1--in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.
TM
Select Models
To Next Page
Need help?
General