9
COMP
FRAME
SIZE
HEAT
EXCH
SIZE
MAXIMUM
MACHINE
WEIGHT
VESSEL
LENGTH
DIM. “A” DIM. “B” DIM. “C”
CHAIN LENGTH
“D” “E” “F”
lb kg ft mm ft-in. mm ft-in. mm ft-in. mm ft-in. mm ft-in. mm ft-in. mm
5
70-74 46,119 20919 14 4267 6- 2 1880 3-6 1067 4-7 1397 11- 6 3505 12-5 3785 12-9 3886
7K-7R 46,119 20919 14 4267 6- 2 1880 3-6 1067 4-7 1397 11- 6 3505 12-5 3785 12-9 3886
75-79 49,977 22669 16 4877 6-11 2108 3-6 1067 4-7 1397 11-11 3632 13-3 4039 13-7 4140
7T-7Z 49,977 22669 16 4877 6-11 2108 3-6 1067 4-7 1397 11-11 3632 13-3 4039 13-7 4140
80-84 55,981 25393 14 4267 6- 2 1880 3-6 1067 4-7 1397 11- 6 3505 12-5 3785 12-9 3886
8K-8R 55,981 25393 14 4267 6- 2 1880 3-6 1067 4-7 1397 11- 6 3505 12-5 3785 12-9 3886
85-89 59,564 27018 16 4877 6-11 2108 3-6 1067 4-7 1397 11-11 3632 13-3 4039 13-7 4140
8T-8Z 59,564 27018 16 4877 6-11 2108 3-6 1067 4-7 1397 11-11 3632 13-3 4039 13-7 4140
15’ - 0” (4572 mm) MIN
21’ - 0” (6401 mm) MAX
HEIGHT ABOVE FLOOR
CG — Center of Gravity
MACHINE RIGGING GUIDE
NOTES:
1. Each chain must be capable of supporting the entire weight of
the machine. See chart for maximum weights.
2. Chain lengths shown are typical for 15 (4572 mm) lifting height.
Some minor adjustments may be required.
3. Dimensions “A” and “B” define distance from machine center of
gravity to tube sheet outermost surfaces. Dimension “C”
defines distance from machine center of gravity to floor.
Fig. 6 — Machine Rigging Guide (Heat Exchanger Size 70 Through 8Z) with
Free-Standing or Unit-Mounted Starter
a19-1312tf
To Next Page
Loading...
