79
APPENDIX A — PIC 5 SCREEN AND TABLE STRUCTURE (cont)
Maintenance VFD Config
Swift Restart
LEGEND *Default value is shown only if configurable in this table.
CCN TABLE NAME: VFD_MCFG
PIC 5 PATH: Main Menu Maintenance Menu Maintenance VFD Config
LINE PIC 5 DESCRIPTION CCN NAME RANGE
DEFAULT
VALUE*
UNIT READ/WRITE
1 VFD Config Conflict vfd_cflt NO/YES No RO
2 Delete VFD Config
Yes = Delete, No = Keep
del_vfdc
NO/YES No RW
3 Motor Rated Load Current rla_load 200 amps RO
4 Motor Nameplate Current rla 200 amps RO
5 Motor Nameplate Voltage rlv 460 volts RO
6 Motor Nameplate RPM rpm 3000 rpm RO
7 Motor Nameplate kW rlkw 1500 kW RO
8 Compressor Speed 100% comp_100 50 Hz RO
9 Skip Frequency 1 skipfrq1 102 Hz RO
10 Skip Frequency 2 skipfrq2 102 Hz RO
11 Skip Frequency 3 skipfrq3 102 Hz RO
12 Skip Frequency Band skipband 0 Hz RO
13 Increase Ramp Time ramp_inc 30 sec RO
14 Decrease Ramp Time ramp_dec 30 sec RO
15 Line Voltage Imbalance% lvim_th 10 % RO
16 Line Volt Imbalance Time lvim_per 10 sec RO
17 Line Current Imbalance% lcim_th 40 % RO
18 Line Current Imbal Time lcim_per 10 sec RO
19 Motor Current Imbalance% mcim_th 40 % RO
20 Motor Current Imbal Time mcim_per 10 sec RO
21 Single Cycle Dropout scycd_en DSABLE/ENABLE DSABLE RO
22 PWM Switch Frequency
0 = 2 kHz, 1 = 4 kHz
pwm_freq
0/1 0 RO
23 Restore Defaults res_def NO/YES No RO
24 Communication Timeout com_tout 10 sec RO
CCN TABLE NAME: MAISWRST
PIC 5 PATH: Main Menu Maintenance Menu Swift Restart
LINE PIC 5 DESCRIPTION CCN NAME RANGE
DEFAULT
VALUE*
UNIT READ/WRITE
1 SRD Position @Shutdown srd_shut 0 to 100 % RO
2 VFD Speed @Shutdown vfd_shut 0 to 100 % RO
3 GV1 Position @Shutdown gv1_shut 0 to 100 % RO
4 Evap Sat Temp @Shutdown est_shut –40 to 280 °F RO
5 Power Recovery Duration pd_dur 0 to 65535 min RO
6 Power Down Active power_dn NO/YES RO
7 Auto Restart Active auto_rst NO/YES RO
8 Swift Restart Active sw_rst NO/YES RO
RO — Read Only
To Next Page
Loading...
