4
[1114]
[1729]
[2236]
[508]
[1670]
[3587]
[3078]
[148]
4.50
[114]
46.00
[1168]
96.00
[2438]
[2769]
[80]
[863]
NOTES:
1. Unit must have clearances as follows:
Top — Do not restrict
Sides and Ends — 6 ft (1.8 m) from solid surface.
2. Temperature relief devices are located on liquid line
and economizer assemblies and have
1
/
4
-in. flare
connection.
3.
3
/
8
-in. NPT vents and drains located in each cooler
head at each end of cooler.
4. Drawing depicts unit with single point power and
standard two-pass cooler. Refer to the Pa
ckaged
Chiller Builder program for other configurations.
5. Dimensions are shown in inches. Dimensions in [ ]
are in millimeters.
TOP VIEW
a30-5189
Fig. 2 — 30XA080 Air-Cooled Liquid Chiller Dimensions (See Note 4)
To Next Page
Loading...
