To Next PageTo Next Page
Need help?Do you have a question about the Carrier Aquasnap 30RB 140R and is the answer not in the manual?
General| Model | 30RB 140R |
|---|---|
| Category | Chiller |
| Cooling Capacity | 140 kW |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| Power Supply | 400V / 3Ph / 50Hz |
Outdoor installation requirements, level surface, space for access, and vibration isolation.
Table detailing sound levels, dimensions, weight, and component specifications for the unit range.
Detailed electrical data including voltage, current, power, and start-up current for various models.
Compressor-specific electrical data including current, LRA, and power factor.
Requirements for the main power supply voltage, frequency, and adherence to nameplate specifications.
Calculation and acceptable limits for voltage phase imbalance to prevent warranty invalidation.
Guidelines for selecting appropriate cable sizes based on installation conditions and regulations.
Defines the permissible operating temperatures for water and air for various unit configurations.
Data on minimum and maximum water flow rates for the heat exchanger based on unit size.
Graphical representation of pressure drop versus water flow rate for different unit models.
General advice on connecting hydraulic circuits, water analysis, and fluid compatibility.
How variable speed pumps maintain pressure differential by adjusting pump speed.
How variable speed pumps maintain temperature difference by adjusting pump speed.
Charts showing available static pressure for high-pressure pumps based on water flow rate.
Comprehensive pre-start checks for installation, safety devices, and connections.
Steps for unit commissioning, including reading instructions and performing tests.
Critical checks for compressors, hydraulics, and refrigerant charge before operation.
More advanced maintenance requiring specific expertise, including electrical, hydraulic, and mechanical checks.
Specialized maintenance tasks requiring manufacturer or authorized personnel, like component replacement.
Essential checks for shipping damage, unit installation, power supply, and wiring integrity.
Critical start-up checks including pump connection, oil level, leak checks, and voltage imbalance.
Verification of water loop volume, corrosion inhibitor, frost protection, and piping.
Procedure for measuring and verifying evaporator pressure drop to determine flow rate.
Recording key operating temperatures and pressures after the unit has stabilized.
