General information and characteristics
IMPORTANT:
Read this manual carefully before using the appliance.
indicated in the “Operating Limits” table shown in the remote
controller installation manual.
malfunctioning may occur.
damaged in transport; if it has file an immediate claim with the
shipping company.
requirements.
Remote controller
Operating mode button (cooling/heating)
Economy button
Power supply LED
Economy LED
Cooling mode LED
Heating mode LED
Alarm code LED
Switching on and normal operation
Power supply
outdoor 30AW unit.
to the standards in force and the diagrams
shown in the installation manual and supply
electricity to the unit.
The green line LED will come on. All other LEDs
will remain off.
ON/OFF control
cooling
or the heating LED will
come on and the unit will start working in either
green LED and will go off and the unit will
begin the switching off procedure in line with
pump).
the remote control will memorise the mode
settings at the time of failure.
Main functions
The main functions of the remote control are:
ON/OFF control:
Switching the machine ON and .
Operating control mode:
Switching between cooling and heating (only for RH models).
ECO control:
Selecting the desired temperature (e.g. day/night).
Mains LED:
Indicates the presence of the electrical power supply.
Heating LED:
Indicates heating operation.
Cooling LED:
Indicates cooling operation.
ECO LED:
(e.g. night).
Alarm LED:
Indicates the presence of a machine alarm;
128H96.indd 2 18-02-2010 16:19:35
To Next Page
Loading...
