1616
To setup a schedule where all days of the week will not follow the
same schedule.
Fill in Table 2, which follows this procedure, with the desired times and
setpoints for each day. Use this table as a guide during programming and for
future reference. (continued)
1. Open the thermostat door.
2. Press and release the set button repeatedly until the screen displays daily
schedule in the center of the screen. The list of the days of the week will
be displayed on the left.
3. Press the soft button under the days of the week until the day or days
you want to program are displayed.
4. Look at the column to the right of the days of the week. This column
displays the time period (day, eve, sleep, or wake). To set the wake time,
press the soft button under the time period until wake is displayed,
press the soft button under the hour orminute, and then press the up
or down button to change the time. (continued)
Programming the thermostat
To Next Page
Loading...
Need help?
General
