3636
Hybrid Heat (heat pump with a furnace system only):
This thermostat works with Carrier Hybrid Heat systems offering maximum
comfort and economy by automatically controlling whether your system
delivers heating with the heat pump, with the furnace, or with both options
working together.
Service Reminders:
The thermostat tells you when it's time to change the furnace filter. The check
filter reminder will be displayed on the upper left of the screen.
To remove the reminder after you or your dealer have replaced the filter,
press and hold the done button for about three seconds.
Auto Changeover:
The thermostat displays one of five modes: heat, cool, Em heat (heat pump
version only), heat cool (auto mode) and off. When the mode selection is for
both heating and cooling - auto mode - the system will automatically switch
from heating to cooling, or from cooling to heating, to maintain the temperature
setpoints.
Hybrid heat, Service reminders, Auto change
To Next Page
Loading...
