( ) 14
USE OF REMOTE CONTROL (Cont.)
FAN ONLY MODE
START
1. Press " Mode " button to select FAN mode
on the remote control display.
2. Press " Fan " button to select the desired
fan speed on the remote control display.
3. Press " On/Off " button to start
the air conditioner.
ON symbol appears on the
remote control display.
OPERATION indicator will illuminate
on the display panel of indoor unit.
Fan mode starts immediately.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
• Fan mode does not control temperature.
The setting temperature is not displayed on
the remote control display.
3
1
2
To Next Page
Loading...