( ) 26
9. INDOOR UNIT CLEANING
Warning!
The indoor unit must be disconnected from the main supply before indoor unit cleaning.
Cleaning the indoor unit and remote controller
CAUTIONS
• Use a dry cloth to wipe the indoor unit and remote control.
• A cloth dampened with cold water may be used on the indoor unit if it is very dirty.
• The front panel of the indoor unit can be removed and cleaned with water.
Then wipe it with a dry cloth.
• Do not use water to clean inside the air conditioner exposure to water can destroy the electrical
insulation, leading to possible electric shock.
• Do not use a chemically treated cloth or duster to clean the unit.
• Never use water hotter than 40°C to clean the front panel, if could cause deformation of discoloration.
• Avoid any contact with heat sources as hot air which can damage the indoor unit casing.
• Do not use benzene, thinner, polishing powder, or similar solvents for cleaning.
These may cause the plastic surface to crack or deform.
To Next Page
Loading...