Need help?Do you have a question about the Carrier Debonair 2 and is the answer not in the manual?
Details the meaning of HEAT, COOL, AUTO, and OFF indicators on the display.
Details Heating Only, Cooling Only, AUTO, and OFF modes for 4-pipe systems.
Explains HEAT and OFF settings for 2-pipe operation.
Explains AUTO mode and its conditions for 2-pipe operation.
How to adjust desired temperatures in Auto/Program mode using buttons.
Procedure to enter setup screens using MODE and FAN buttons simultaneously.
Adjusting deadband for 1st stage and minimum heat/cool differential.
Detailed explanation of deadband operation for three-speed fans.
Procedure to reset all settings to factory defaults.
Explains the enforced minimum difference between setpoints.
Details the meaning of HEAT, COOL, AUTO, and OFF indicators on the display.
Details Heating Only, Cooling Only, AUTO, and OFF modes for 4-pipe systems.
Explains HEAT and OFF settings for 2-pipe operation.
Explains AUTO mode and its conditions for 2-pipe operation.
How to adjust desired temperatures in Auto/Program mode using buttons.
Procedure to enter setup screens using MODE and FAN buttons simultaneously.
Adjusting deadband for 1st stage and minimum heat/cool differential.
Detailed explanation of deadband operation for three-speed fans.
Procedure to reset all settings to factory defaults.
Explains the enforced minimum difference between setpoints.
General| Temperature Range | 45°F to 90°F (7°C to 32°C) |
|---|---|
| Display | LCD |
| Power Source | Battery-powered (2 AA batteries) |
| Hold Function | Yes |
| System Switch | Heat, Cool, Off |
| Fan Control | Auto, On |
To Next Page