Carrier Debonair 2 - About Advanced Features & Operation

About Advanced Features & Operation
16
1 Place the thermostat in the OFF mode.
2 Press and hold the MODE button. While
holding the MODE button, press and hold
the DOWN button for 5 seconds. All icons
will appear on the display.
3 Press the MODE button once. The thermostat
temperature will be displayed and may be
calibrated using the UP or DOWN button.
4 After calibration is complete, press the
MODE button once to save your changes
and return to normal operation.
MODE
MODE
MODE
CALIBRATION - Under normal circumstances it will not be necessary
to adjust the calibration of the temperature sensor. If calibration is
required, please contact a trained HVAC technician to correctly perform
the following procedure.
Fan
OFF
Override
AUTO
OUTSIDE
ONOFF
Locked
Setup
unoccupied