Advanced Setup
15
Df = Factory Default Setting
Step# Description  Range  Df
 1  Display Blanking  On / Off  On 
 2  Single or Dual Setpoint  1 / 2    2
 3  2- or 4- Pipe System  2 / 4    4
 4  2-Pipe System Operation  1 - 5    1
 5  Fan Auto Operation  On / Off  Off
 6  Deadband/Temp. Swing 1st Stage  1˚ -  6˚  2˚
 7  Minimum Heat/Cool Differential  0˚ -  6˚  2˚
 8  Thermoglow Backlight  On / Off  Off
 9  Fahrenheit or Celsius  F / C    F
10  Read Only Duct Sensor?  On / Off  Off
11  Dry Contact Polarity  NO / NC  NO
12  Dry Contact Operation  Unoccupied / Off  Unoccupied
13  Unoccupied Cool Setpoint  35˚ - 99˚, OF  85˚
14  Unoccupied Heat Setpoint  OF, 35˚ - 99˚  55˚