24
PROGRAMMING THE THERMOSTAT
6. Set the cooling temperature for that time period by press-
ing the button under the cool set at: temperature on
the right and then pressing the up or down button until
you reach the desired cooling temperature.
7. Repeat this process for each of the three remaining time
periods – day, evening and sleep – by first pressing the
button under the four time periods to select the
time period with the arrow. To change the start at time,
press the button under the hour or minute,then
press the up or down button, stopping on the desired
time. To set the heating temperature, press the button
under heat set at:,thenpresstheup and down button,
stopping on the desired temperature. To set the cooling
temperature, press the button under cool set at:, then
press the up or down button, stopping on the desired
temperature.
8. To set the schedule for another day, press the button
under the days of the week on the left again until
the arrow is next to the day you want to program.
9. Repeat steps 4 through 7 to program that day.
To Next Page
Loading...
Need help?
General
