Carrier G Series Cooling - UNIT OPERATION; General Operation Guide; Dry Operation Mode

ON/OFF
TEMP
.
SLEEP
MODE FAN FLAP
CLOCK EVERYDAY HOUR MINUTE
RESERV
.TIMER
ON OFF
CANCEL
A
GENERAL OPERATION
①
②
③
D RY OPERAT I O N
④
⑤
⑥
•Dry operation eliminates moisture economically by operating the compressor, indoor and outdoor fan motor
intermittently, so that the room temperature is maintained at the set temperature.
P R O C E D U R E
1
ON/OFF button
Press this button and the COOL operation is indicated.
• A receiving beep is heard.
•The green UNIT ON lamp of the indoor unit display
i l l u m i n a t e s .
2
MODE button
Press this button to select the desired operation.
C O O L→ FAN → D R Y
3
FAN SPEED button
Press this button to select the desired fan speed.
AUTO → LOW → MED → H I G H
4
T E M P. (▲▼) button
Press these buttons to set the desired temperature.
5
FLAP button
Press this button to control the desired air flow direction.
6
ON/OFF button
Press this button to stop the unit operation.
•A receiving beep is heard.
•The UNIT ON lamp is extinguished.
O W N E R ’S MANUAL - 1 3
UNIT OPERAT I O N