SLEEP
This function enables the user to automatically switch off the unit.
30
70
110
150
UNIT OPERAT I O N
O W N E R’S MANUAL - 1 8
If you want to stop the operation after 3 hours from now,
1
Press the SLEEP button 3 times
•3:hr will be displayed and the signal will be
f l a s h i n g .
•After 5 seconds, the stopping time will be displayed.
•The unit operates in sleep mode for 3 hours and will
switch off at the end of the 3 hours.
•To change the reserved time or to cancel, press the
SLEEP Button again.
1:hr → 2:hr → 3:hr →7:hr → 9:hr → C a n c e l
2
When the SLEEP Timer is set, the unit will control the
set temperature to avoid overcooling in Cool
or Dry operation.
Set temperature is changed as shown below.
Sleep Ti m e r
P R O C E D U R E
•When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed so as not to interrupt the sleep.
•The SLEEP timer can be combined with the ON timer. ( Refer to p.16 for combination )
N O T E
①
S E T
T E M P .
T I M E ( M I N . )
( For Cooling or Dry mode )
℃
+ 0 . 5
℃
+ 0 . 5
℃
+ 0 . 5
℃
+ 0 . 5
℃
SET TIME
To Next Page
Loading...
