Carrier Infinity series - Page 7

Internet Login and Use:
• To Iogin to your account via the Internet, please go to the
following web address: www.myinfinity.carrier.com/remoteaccess
• Enter your user name and access code in the boxes provided,
then click "login".
• You will be required to confirm any unacknowledged Urgent
Notifications before entering your home page.
From your home page, you can:
• Check the current status of your comfort system and obtain
updated system status.
• Change current settings.
• Set your comfort schedule.
• Set vacation settings.
• Review your notification history.
• Review and update your user profile and
change your access code.
• Review and update location profiles.
You can access up to four locations (i.e. main home, vacation home)
from your account. Each location can be connected to two comfort
systems. Please make sure you have selected the correct location
and system in the upper right-hand corner of your screen.
Change Current Settings
SYSTEM MODE: You can put your system in Heat, Cool or Auto
modes. If you do not wish to change system mode, select "No
change".
HEAT AND COOL SETTINGS: You can set the system temperature
between 40 and 90 degrees E You can change the heating temper-
ature setting only when the system is in Heat or Auto mode. You
can change the cooling temperature setting only when the system
is in Cool or Auto mode.
FAN MODE: The fan can be set for Low, Medium, High or Auto oper-
ation. On Low, Medium and High the fan will continue to circulate air
even if the system is not actively heating or cooling. Auto mode will
only run the fan while the system is actively heating or cooling.
• Using the pull-down menus select the system mode, heat set-
ting, cool setting, fan setting, and how long you would like your
settings to be held.
• Review your settings before finalizing them. You can click on
"back" to make changes, "cancel" to quit, or "send home" to
implement your changes.
• It may take up to 3 minutes for changes to take effect.
• You will receive a confirmation message when current settings
have been implemented if you have selected the option in the
"user profile".
Before changing your current settings, be sure you are viewing the
correct location and system found in the upper right-hand corner of
your screen.
6
User Name
&ccess
Code
F Rem_mb,er _,_e
Ho_
Ch_ Curren_ _in_ls
_ Program Schedule
Vacation
;U._r Pro_i_e
Edit Location
My Dealer
Cen_ ct Us
Ip
Lo#oul
current location:
IIndylab _ view
current system:
Ii _ ',/lOW
Change Current Settings
Location: IndyLab, System: 1
Please enter your infon'natJon below and click the 'next' button.
etep
Slop
[]
Step
[]
Heat Setting
Cool Setting
G Hold indefinitely _ Hold F0r: _
hr. rain,
Fan Mode(optional)