30
A13233
6.3.1.1. Auto Mode set up
Once the auto changeover option has been selected, touch SAVE.
S Enable or Disable: Choose to enable or disable auto changeover mode
d Default = Enable
d Default = Enable
S Simultaneous Heat/Cool: Choose to turn simultaneous heat cool demand
feature on or off.
d Default = Off
S If Simultaneous Heat/Cool is turned ON, Auto changeover time is grayed out
and shows N/A.
S If Simultaneous Heat/Cool is turned OFF, Auto changeover time: Adjustable
from 5 to 120 minutes
d Default = 30 minutes
NOTE: AUTO mode is intended to switch between Heating and Cooling modes
based on temperature demand. A gradual auto transition is the energy--conscious
default that will satisfy the majority of customers. Some customers might have
significant and simultaneous heating and cooling demands in different zones. To
address this need, a special simultaneous heating and cooling demand auto mode
To Next Page
Loading...
