Carrier Infinity SYSTXCCITC-01SI - 4.Reset Factory Defaults; 5.Scheduling Enable

33
6.3.1.4. Reset factory defaults
This option allows the installer to reset certain factory parameters. After the
selections are made, touch SAVE.
S Program Schedule: Reset back to pre--programmed time and temperature.
S User Settings: Reset user settings back to pre-- programmed values.
S Install Settings: Reset installation settings back to pre--programmed values.
S Last 10 Faults: Reset the last 10 system faults under the Service menu.
6.3.1.5. Scheduling On/Off
This option lets the installer allow programming features. After the selection is
made, touch SAVE.