Carrier KSACN1001AAA - Setting ON;OFF Timers; Procedure for Setting ON or OFF Timers

14 Specifications subject to change without notice. OM-KSACN1001AAA-01
To Set the ON or OFF TIMER
1. Press TIMER to select the ON:DAY or OFF:DAY.
Fig. 27 — Select the ON:DAY or OFF:DAY
2. Press CONFIRM and the TIMER display flashes.
Fig. 28 — Confirm
3. Press the UP or DOWN arrow to set the time. After the time is set, the timer starts or stops.
Fig. 29 — Up or Down arrow to set time
4. Press CONFIRM.
Fig. 30 — Confirm
NOTE: The secondary wired controller cannot set the timer.
No display
ex. O timer set at 18:00