Carrier KSACN1001AAA - System Maintenance and Compliance; Restoring Factory Settings; Technical Requirements

0M-KSACN1001AAA-01 Specifications subject to change without notice. 39
Restore Factory Settings
1. When the air conditioning unit is OFF and in QUERY mode , press the UP or DOWN arrow to select
, the temperature zone appears --.
Fig. 84 — UP or DOWN Arrows - Select
2. Press CONFIRM to enter the setting.
3. Press the UP or DOWN arrow to select ON.
4. Press CONFIRM.
NOTE: All the Wired Controller's settings are restored to the factory default settings.
TECHNICAL INDICATION AND REQUIREMENT
EMC and EMI comply with the CE certification requirements.