To Next PageTo Next Page
Need help?Do you have a question about the Carrier KSACN1001AAA and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Model | KSACN1001AAA |
| Category | Thermostat |
| Language | English |
Explains DANGER, WARNING, CAUTION, NOTE signal words used with safety-alert symbols for personal injury.
Warns about electrical shock hazard during installation and requires ensuring power is OFF before proceeding.
Warns against installing the controller in areas with excessive steam, oil, or sulfide gas to prevent damage.
Overview of primary operational functions including mode, fan speed, timer, and special modes like Sleep and Turbo.
Highlights physical and display characteristics such as LCD display, error code display, and design aspects.
Details various icons and readouts on the controller display, including mode, fan speed, temperature, timer, and special function indicators.
Explains the operation of essential buttons like Power, Mode, Timer, Fan Speed, Adjust, and Confirm for basic control.
Covers buttons for setting Day Off, accessing general Functions, and Copying settings, enabling advanced operations.
Step-by-step guide to accurately set the current day and time on the wired controller for proper operation.
Instructions for turning the wired controller ON and OFF to start or stop system operation.
Details how to activate and deactivate the Freeze Protection function for low-temperature heating.
Guide on selecting the desired operating mode such as AUTO, COOL, DRY, HEAT, or FAN.
Instructions for adjusting the desired room temperature and switching between Fahrenheit and Celsius scales.
Guide on how to set the fan speed to AUTO, LOW, MEDIUM, or HIGH for optimal comfort.
Steps to enable or disable the audible tone feedback for button presses on the wired controller.
How to activate and deactivate the Child Lock to prevent unintended changes to settings.
Explanation of the Sleep function, its effect on fan speed, and conditions that cancel it.
Instructions for enabling the Turbo mode for rapid cooling or heating, available on select models.
Guide on how to enable and disable the Follow Me feature, which uses the remote controller's sensor for temperature readings.
Introduces Weekly, On:Day, Off:Day, and On and Off:Day timer functions for scheduling operations.
Step-by-step instructions for programming the ON or OFF timer settings, including time adjustment and confirmation.
Guide on selecting Week 1 and then setting specific days within the week for timer configurations.
Steps to set the desired ON time for Timer Setting 1, including time adjustment and confirmation.
Instructions for setting the desired OFF time for Timer Setting 1, including time adjustment and confirmation.
Instructions on how to turn the weekly timer operation ON or OFF via the TIMER button.
Explains how to temporarily turn off the unit with the week timer and how to cancel timing functions completely.
Steps to designate specific days within Week 1 as 'Day Off' to exclude them from timer operations.
How to set delay periods (0h, 1h, 2h) for the unit's operation during weekly timer use.
Instructions on how to copy scheduled events from one day to another for efficient setup.
Guide on selecting Week 2 and then setting specific days within the week for timer configurations.
Instructions for setting the ON timer for Timer Setting 1 for each day of Week 2, supporting up to 8 settings.
How to select the operational mode (e.g., AUTO, COOL, HEAT) for a specific timer event within Week 2 settings.
Guide on adjusting room temperature and fan speed for scheduled timer events in Week 2.
Instructions on initiating and terminating the Weekly Timer operation for Week 2 schedules.
Steps to designate specific days within Week 2 as 'Day Off' to exclude them from timer operations.
Instructions on copying scheduled events from one day to another within Week 2 for efficient setup.
Guide on how to delete specific time scale entries for a given day in the weekly timer setup.
A reference list of error codes displayed on the unit and their corresponding definitions for troubleshooting issues.
Procedure for querying the temperature and fault status of indoor units connected to the controller.
Guide for ductless systems to query and adjust the static pressure value (0-4) using the controller.
Instructions for activating and completing the automatic airflow adjustment process for optimal performance.
How to adjust temperature compensation values for the Follow Me function to fine-tune room temperature readings.
Guide on configuring available modes like Heat Pump, Cooling Only, Heating Only, or No Auto Mode.
Instructions for defining the minimum (tLo) and maximum (tHi) temperature limits for controller operation.
How to set the wired controller to accept or ignore remote control signals by enabling or disabling the remote control mode.
Steps to reset all controller settings back to their original factory defaults.
Notes compliance with CE certification requirements for EMC and EMI.
