Carrier KSACN1001AAA - Controller Settings and Adjustments; Room Temperature Setting; Fan Speed Adjustment; Keypad Tone Configuration

10 Specifications subject to change without notice. OM-KSACN1001AAA-01
Room Temperature Setting
1. Press the UP or DOWN arrow (Lower or Raise
(see Fig.14)) to set the room temperature.
NOTE: This function in unavailable in FAN mode.
Fig. 14 — Up or Down Arrows (Lower and
Raise)
Indoor Setting Temperature Range:
62°F~86°F (17°C~30°C)
2. °F and °C Scale Selection - Press and
hold the UP or DOWN arrow for 3 seconds
to alternate the temperature display
between the °F and °C scale.
Fan Speed
•Press FAN SPEED to set the fan speed.
NOTE: This function is unavailable when the unit is
in AUTO or DRY mode.
Fig. 15 — Fan Speed
Keypad Tone
Enable Keypad Tone
•Press SWING and FUNC. together (Fig. 16)
for 3 seconds to enable the keypad tone.
Disable Keypad Tone
•Press SWING and FUNC. together (Fig. 16)
for 3 seconds to disable the keypad tone.
Fig. 16 — Keypad Tone Set
Lower
Raise
HIGHAUTO LOW
MED