0M-KSACN1001AAA-01 Specifications subject to change without notice. 33
QUERIES AND SETTINGS
CAUTION: All changes should be performed ONLY by authorized professionals.
Indoor Unit Tx Temperature Query Function
1. When the air conditioning unit is OFF, press COPY for 3 seconds to enter query mode on the wired
controller.
Fig. 74 — Copy
2. Press the UP or DOWN arrows to select. If connected to an Air Handler Unit, display displays
P:00. If connected to multiple Air Handler Units, press up or down to display P:01, P:02, etc. and
then press “Confirm” to query the Air Handler Unit’s Tn(T1~T4) temperature and fan fault (CF),
press up or down to select. Not pressing a key for 15 seconds or pressing “Back” or “ON/OFF”
exits the temperature query function.
Fig. 75 — Up or Down Arrows
To Next Page
Loading...
