Contents
Table 10 — LID Primary and Secondary Messages and Custom Alarm/
Alert Messages with Troubleshooting Guides (Continued)
D. Pre-Start Alerts
E. Normal or Auto.-Restart
F. Start-Up Failures
G. Compressor Jumpstart and Refrigerant Protection
H. Normal Run with Reset, Temperature, or Demand
I. Normal Run Overrides Active (Alerts)
J. Out-Of-Range Sensor Failures
K. Machine Protect Limit Faults
L. Machine Alerts
M. Spare Sensor Alert Messages
N. Other Problems/Malfunctions
Table 11A— Thermistor Temperature (F) vs Resistance/Voltage Drop
Table 11B— Thermistor Temperature (C) vs Resistance/Voltage Drop
Table 12 — Benshaw, Inc. Solid-State Starter Troubleshooting Guide
To Next Page
Loading...
