4
3
2
1
How to Install Casters (Optional)
Inside of the air purifier package, there is a small box containing four casters and eight screws.
Retain the removed bottom bases and screws for future use.
Replace each base with a caster, utilizing two screws per caster.
Remove the four bottom bases from the air purifier with a screw driver.
If there is no caster box inside the product box, please contact customer
service at 1-888-320-0909.
©2022 Carrier. All Rights Reserved.
Manufacturer reserves the right to discontinue, or change at any time, specifications
or designs without notice or without incurring obligations. Third-party trademarks and
Third-party trademarks and logos are the property of their respective owners.
carrierathome.com 1-888-320-0909 01-811-20535-01
2/2022
Normal Operation
Press the button to turn on.
►
The previously selected operation mode will
be displayed.
Press the button on the control panel to
select your desired fan speed.
►
You can adjust the fan speed from level 1 (F1) to
level 18 (F18).
Note: The default home display on Wi-Fi® models
will show a PM2.5 reading. Once the button
is pushed, the display will switch to show designated
fan speed.
Note
Note
When the air purifier turns on, the sensor is initialized and the display
shows during initialization.
Refer to the User Manual
and the Carrier Home
app for complete set up
instructions for the Smart
Air Purifier models.
2
1
Note
To Previous Page
Loading...
