PGAP
Installation Instructions
Germicidal Air Purifier
Sizes 1620, 1625, 2020, 2025, 2420
NOTE: Read the entire instruction manual before starting the
install.
TABLE OF CONTENTS
PAGE
INTRODUCTION 1...................................
HOW IT WORKS 1...................................
SAFETY CONSIDERATIONS 1.........................
APPLICATION CONSIDERATIONS 2....................
INSTALLATION 3....................................
START-- UP AND OPERATION 9........................
MAINTENANCE 10...................................
TROUBLESHOOTING 11..............................
ERROR AND STATUS CODES 12.......................
INTRODUCTION
Congratulations for selecting the Air Purifier for your home
comfort system! The Air Purifier is proven to remove and kill
airborne germs and allergens, including viruses and bacteria. The
Air Purifier is a cornerstone of Healthy Home Solutions for
providing healthier, cleaner air in your home.
HOW IT WORKS
The Air Purifier provides extremely high filtration performance
while killing captured contaminants, including viruses and
bacteria. The Air Purifier treats the entire air--stream through a state
of the art, three--stage process.
In stage one, the particles are electrically charged by a
precision-- point ionization array as they enter the Air Purifier.
In stage two, the charged particles are electrically attracted to the air
purification cartridge, which is located within an electric field.
In stage three, captured particles are killed by electrical current
flow and ion bombardment.
The Air Purifier is Listed to applicable UL Standards and
requirements by Underwriters Laboratories Inc.
Ce purificateur d’air est conforme aux normes applicables dites
‘UL’, de Underwriters Laboratories Inc.
A11332
Fig. 1 -- PGAP Unit
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service, maintenance,
or use can cause explosion, fire, electrical shock, or other
conditions which may cause death, personal injury or property
damage. Consult a qualified installer, service agency or your
distributor or branch for information or assistance. The qualified
installer or agency must use factory--authorized kits or accessories
when modifying this product. Refer to the individual instructions
packaged with the kits or accessories when installing.
Follow all safety codes. Wear safety glasses, protective clothing,
and work gloves. Have a fire extinguisher available. Read these
instructions thoroughly and follow all warnings and cautions
included in literature and attached to the unit. Consult local
building codes and the current edition of the National Electrical
Code (NEC) NFPA 70.
In Canada, refer to the current editions of the Canadian Electrical
Code CSA C22.1.
Recognize safety information. When you see this symbol
on
the unit and in instructions or manuals, be alert to the potential for
personal injury. Understand the signal words DANGER,
WARNING,andCAUTION. These words are used with the
safety-- alert symbol. DANGER identifies the most serious hazards,
which will result in severe personal injury or death. WARNING
signifies hazards, which could result in personal injury or death.
CAUTION is used to identify unsafe practices, which may result
in minor personal injury or product and property damage. NOTE
is used to highlight suggestions which will result in enhanced
installation, reliability , or operation.
To Next Page
Need help?
General
