Air Purier
Quick Start and Installation Guide
RECOMMENDED INSTALLATION PAIRINGS
NOTE: A qualied installer or agency is required for proper installation. This guide is
for reference only and it is not intended to replace the product Installation Instructions.
The rst two models noted below
are designed to be installed
with furnaces, while the last
three models are designed to be
installed with fan coils.
Note: Air Flow Sensor Accessory
Kits are available if your
installation does not match
these recommendations
– see KIT160000,
or KIT161000.
Models DGAPAXX1625, DGAPAXX2025, DGAPAXX1620, DGAPAXX2020, DGAPAXX2420
There are three main mounting
options for the air purier product
– top mount, bottom mount, or
side mount. The location of the
Air Purier should be readily
accessible. Enough room
should be provided for periodic
replacement of the Air Purier
cartridges.
1
MOUNTING OPTIONS FOR AIR PURIFIERS
2
DGAPAXX1625 DGAPAXX2025 DGAPAXX1620 DGAPAXX2020 DGAPAXX2420
Furnace X X
Fan Coil X X X
Return Duct
Return Duct
Side Mount
Airow
Airow
Airow