Fig. 7 — Base Unit Dimensions — 50A2,A3,A6,A7040-050
NOTES:
1. Weights include economizer.
2. center of gravity.
3. Unit clearances:
Top of units: no overhang
Condenser coil: 4’ - 0” [1219]
Economizer side: 6’ - 0” [1829]
Heat side: 4’ - 0” [1219]
Filter access side: 10’ - 0” [3048] (for removal of
evaporator coil)
4. Bottom ducts are designed to be attached to acces-
sory roof curb. If unit is mounted on dunnage, it is
recommended that the ducts be supported by cross
braces as done on accessory roof curb.
5. Dimensions in [ ] are in millimeters. All other dimen-
sions are in inches.
*Operating weight includes largest indoor fan motor, microchannel
heat exchanger, modulating power exhaust (variable air volume units),
and variable frequency drive (variable air volume units).
a50-8837
To Next Page
Loading...
