Carrier WTC-RCI-D User Manual

1
Water Terminal Controller
Room Control Interface
Important
This manual describes how to use WTC
Room Control Interfaces.
Depending on the type of the user interface
and your installation, some of the functions
described in this manual may not be active.
WTC Room Control Interfaces provide:
■ Temperature control
■ Fan speed control
■ Occupancy control
■ Louver control (optional)
■ Lighting control (optional)
■ Blinds control (optional)
If you have any questions, please contact your
installer for more information.
Scan this QR code
to access Carrier
technical literature.
WTC-RCI-D / WTC-RCI-DC WTC-RCI-DM / WTC-RCI-DCM
Motion detector
LCD screen
Action buttons
UP button
MENU button
DOWN button
English

Carrier WTC-RCI-D Specifications

General

Brand	Carrier
Model	WTC-RCI-D
Category	Controller
Language	English

Summary

WTC Room Control Interface Overview

Key Interface Functions

Details temperature, fan speed, occupancy, louver, lighting, and blinds control capabilities.

Room Control Interface Display Guide

Screen Display and User Settings

Understanding Default Screen Variations

Explains how the default screen may vary based on installer configuration and options.

Adjusting Comfort Temperature

Guides users on setting comfort temperature steps for occupied rooms.

Configuring Fan Speed

Instructions for setting fan speed manually or automatically for occupied rooms.

Occupancy and Louver Control

Managing Room Occupancy Status

How to manually set room occupancy for energy optimization and comfort.

Setting Louver Position and Swing

Control air flow direction by setting louver position or swing mode.

Lighting Control Operations

Adjusting Light Brightness and On/Off

Instructions for controlling lighting groups, including dimming and on/off commands.

Blinds Control Operations

Adjusting Blinds Position

How to raise, lower, or stop blinds using the control interface.

Adjusting Blinds Tilting

Instructions for rotating blinds up, down, or stopping the rotation.