Need help?Do you have a question about the Carrier WTC-B-207 and is the answer not in the manual?
General| Operating Voltage | 24 VAC |
|---|---|
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Display | LCD |
| Humidity Control | Yes |
| Indoor/Outdoor | Indoor |
| Compatibility | Carrier communicating systems |
| Power Source | 24 VAC |
General safety precautions and requirements for installing and servicing the equipment.
Mandatory safety measures for personnel accessing electrical components, including power shut-off.
Requirements for isolation devices, wiring, environment, and preventing interference.
Overview of the Water Terminal Controller (WTC) and its functionalities.
Explanation of symbols and markings found on the device for identification and safety.
Procedure for identifying and addressing LON devices on the network.
Methods for setting MAC addresses and device instance numbers for BACnet controllers.
Diagrams and pinouts for LON communication bus and digital inputs DI1/DI2.
Diagrams and pinouts for BACnet communication bus and digital inputs DI1/DI2.
Details on Rx/Tx LEDs, Normal Operation Status LED, and blink patterns for LONWORKS controllers.
Details on Rx/Tx LEDs, Normal Operation Status LED, and blink patterns for BACNET controllers.
To Next Page