Carrier XCT7 40VCW317FQEE - Page 11

(2) When selecting Intelligent mode, it will display 24°C(76°F), switch the power o󰀨, set the time 12:00, press
Enable and weekday will the default.
(3) If the schedule that you are setting has been set before, the interface will prompt you that the schedule already
exists, you need to cancel it or change the repeated parameters.
(4) After setting, press ‘OK’ to conrm the timing and go ‘back’ to schedule the interface accordingly.
(5) Celsius and Fahrenheit can be selected, and 12-hour or 24-hour can also be selected.
(6) Press the Enter key to delete the schedule when ashes. On the displayed delete interface, choose the num-
ber you want to delete with the direction keys and then press ‘Enter’.
Operation
Enter
Cancel
Please select the No. you want to delete.
all
9
18
27
1
10
19
28
2
11
20
29
3
12
21
30
4
13
22
31
4
13
22
31
5
14
23
32
6
15
24
33
7
16
25
34
8
17
26
35
Schedule
10:30AM
Monday
2011.11.03
Cancel Enter
The Timing of this Unit has been set.
Do you want to replace the previous
setting?
Schedule
10:30AM
Monday
2011.11.03
Cancel Enter
The Timing has been set, please
revise relevant parameters.
Schedule
10:30AM
Monday
2011.11.03
Cancel Enter
The Timer ON of this Unit is in
conict with the existing Timer OFF,
please reset the Timer ON.
Schedule
10:30AM
Monday
2011.11.03
Cancel Enter
The Timer OFF of this Unit is in
conict with the existing Timer ON,
please reset the Timer OFF.
English
9