Need help?Do you have a question about the Carrier Comfort Zone Controller and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Model | Comfort Zone Controller |
| Category | Controller |
| Language | English |
Explains the controller display, showing zone set points, temperatures, and programming info.
Details the clock display for current time, day, and programming start times.
Describes buttons used for weekly programming, start times, and clock setting.
Covers switches for HEAT, COOL, FAN, and EMERGENCY HEAT operations.
Explains accessing zone information, programming, and vacation mode selection.
Details OFF and AUTO modes for the heat switch operation.
Details OFF and AUTO modes for the cool switch operation.
Explains ON and AUTO modes for the fan switch operation.
Describes OFF and ON modes for emergency heat (heat pump systems).
How to use buttons to raise or lower cooling setpoints.
How to use buttons to raise or lower heating setpoints.
Procedure to set the clock minutes using specific buttons.
Procedure to set the clock hour and AM/PM.
Procedure to set the current day of the week for the clock.
How to exit clock setting mode and display the programmed time.
Steps to enter program mode and select a zone for programming.
How to select the weekly period (MTWTHF, SA, SU) and program time periods.
Guidance on programming start times chronologically for each period.
Steps to adjust setpoints, complete time period and week schedules.
Process for programming additional zones and exiting program mode.
How to temporarily change setpoints without altering the program.
Procedure to hold current setpoints indefinitely until released.
Summarized steps for programming the system, including zones and periods.
Concise steps for setting the system clock and date.
Summary of how to activate and deactivate the hold temperature feature.
To Next Page