Carrier Comfort Zone Controller - Overriding Programmed Settings; Temporary Override of Setpoints; Using Hold Temperatures Feature

14
OVERRIDING PROGRAMMING
To override the time programming, press any setpoint button. This will also adjust the setpoints for the override period.
Once the setpoints are adjusted, they will not change until the next programmed time period.
Press to adjust Press to adjust
Cooling Setpoint Heating Setpoint
A95581
If the HOLD TEMPERATURES button is pressed, the current
setpoints will not change with time, but remain at the
last values entered for as long as the hold mode is active.
To release the hold mode, press the HOLD TEMPERATURES
button a second time.
A95582
The controller display will show the word HOLD
whenever the hold mode is active.
A95583
SET
TIME/TEMP
SCHEDULES
SELECT
MIN/HR/DAY
ADVANCE
TIME/DAY
HOLD
TEMPERATURES
HEATCOOL
HOLD
HEATCOOL