Carrier Comfort Zone Controller - Programming Start Times

12
PROGRAMMING
5. Program Start Time
PLEASE NOTE: START TIMES MUST
BE PROGRAMMED IN CHRONOLOGICAL ORDER
AND ALL START TIMES MUST BE IN THE SAME DAY.
NOTE: It is not recommended to use 12.00 a.m. for programming schedule. This may result in a time period
programming error.
Press the ADVANCE TIME/DAY button until the desired start time is displayed.
A95574 A95579
RIGHT
6 AM - Time Period 1
8 AM - Time Period 2
5 PM - Time Period 3
9 PM - Time Period 4
WRONG
6 AM - Time Period 1
2 AM - Time Period 2
9 PM - Time Period 3
5 PM - Time Period 4
WRONG
8 AM - Time Period 1
5 PM - Time Period 2
2 AM - Time Period 3
6 AM - Time Period 4
SET
TIME/TEMP
SCHEDULES
HOLD
TEMPERATURES
SELECT
MIN/HR/DAY
ADVANCE
TIME/DAY
AM