To Next PageTo Next Page
Need help?Do you have a question about the Carson Reflex Wheel Pro LCD and is the answer not in the manual?
Details specific damages and conditions not covered by the CARSON warranty, including misuse, accidents, and unauthorized repairs.
Explains the meaning of the 'crossed-out wheelie bin' symbol for electronic waste and encourages responsible disposal.
Highlights benefits of 2.4 GHz technology, such as no channel negotiation, interference immunity, and higher data capacity.
Advises on optimal placement of antennas and receiver to avoid signal degradation and ensure range.
Provides comprehensive safety rules for operating R/C models, including warnings about speed, aiming, and malfunction detection.
Explains the BEC system for receiver power supply and details how to connect the electronic speed controller and servos.
Illustrates the transmitter's external components and guides on installing AA batteries, including replacement indicators.
Describes how to adjust the throttle operation ratio between forward and brake/reverse modes (50:50 or 70:30).
Details the operation of the throttle trigger and steering wheel, along with trim adjustments and low battery warnings.
Step-by-step instructions for pairing the transmitter with the receiver, ensuring a secure radio link.
Explains the meaning of different LED indicators on the transmitter and receiver during various operations.
Covers selecting models, setting servo directions (REV), travel limits (EPA), and adjusting trims (ST, TH).
Details settings for ABS, Exponential (EXP), Dual Rate (D/R ST, D/R TH), and custom model naming.
Provides essential safety instructions for handling, storing, and disposing of batteries to prevent hazards.
Details specific damages and conditions not covered by the CARSON warranty, including misuse, accidents, and unauthorized repairs.
Explains the meaning of the 'crossed-out wheelie bin' symbol for electronic waste and encourages responsible disposal.
Highlights benefits of 2.4 GHz technology, such as no channel negotiation, interference immunity, and higher data capacity.
Advises on optimal placement of antennas and receiver to avoid signal degradation and ensure range.
Provides comprehensive safety rules for operating R/C models, including warnings about speed, aiming, and malfunction detection.
Explains the BEC system for receiver power supply and details how to connect the electronic speed controller and servos.
Illustrates the transmitter's external components and guides on installing AA batteries, including replacement indicators.
Describes how to adjust the throttle operation ratio between forward and brake/reverse modes (50:50 or 70:30).
Details the operation of the throttle trigger and steering wheel, along with trim adjustments and low battery warnings.
Step-by-step instructions for pairing the transmitter with the receiver, ensuring a secure radio link.
Explains the meaning of different LED indicators on the transmitter and receiver during various operations.
Covers selecting models, setting servo directions (REV), travel limits (EPA), and adjusting trims (ST, TH).
Details settings for ABS, Exponential (EXP), Dual Rate (D/R ST, D/R TH), and custom model naming.
Provides essential safety instructions for handling, storing, and disposing of batteries to prevent hazards.
General| Brand | Carson |
|---|---|
| Model | Reflex Wheel Pro LCD |
| Category | Control Systems |
| Language | English |
