Need help?Do you have a question about the Carson Reflex Wheel Pro2 LCD and is the answer not in the manual?
General| Brand | Carson |
|---|---|
| Model | Reflex Wheel Pro2 LCD |
| Category | Remote Control |
| Language | English |
CARSON's 24-month warranty against manufacturing defects, covering repair, replacement, or refund.
Details damages and situations not covered by the warranty, like misuse or accidents.
Highlights benefits such as ease of use, no channel conflicts, and improved data transfer.
Advises on antenna placement and avoiding obstacles for optimal radio wave transmission.
Details the BEC system and wiring for Reflex Wheel Pro2 and Pro2 LCD models.
Explains the function and adjustment of the throttle rate for different car types.
Details the specific connector pin assignments for the Reflex Wheel Pro LCD receiver.
Details the specific connector pin assignments for the Reflex Wheel Pro2 LCD receiver.
Explains how to adjust steering and throttle trim for precise control.
Informs the user about the low battery warning indicator and necessary actions.
Explains the meaning of different LED indicators on the transmitter.
Guides on selecting, managing, and naming model memories.
Covers REV (reverse) and EPA (travel limit) settings for servos.
Explains how to configure the ABS and EXP (exponential) functions.
Specific instructions for adjusting the steering servo's neutral position.
Specific instructions for adjusting the throttle servo's neutral position.
How to set Dual Rate for steering (D/R ST) and throttle (D/R TH).
Explains the function and adjustment of the throttle rate for different car types.
Details the specific connector pin assignments for the Reflex Wheel Pro receiver.
Details the specific connector pin assignments for the Reflex Wheel Pro2 receiver.
Important note on transmitter-receiver distance during setup and binding.
Informs about the low battery warning and necessary actions.
Explains default failsafe for Pro and Failsafe Pro+ with low voltage protection for Pro2.
Step-by-step guide for establishing a connection (binding) between transmitter and receiver.
Critical notes for the binding process, including distance and avoiding interference.
Essential safety advice for handling, charging, and disposing of batteries.
To Next Page