SERVICE INFORMATION
M. Fuel Switch (Petcock)
This vehicle has a manually operated fuel petcock with three positions. Please follow maintenance
procedures accordingly.
a. Periodically clean the petcock externally with grease remover and water.
b. Check for any leaks or seeping fuel.
“ON” Position
The normal operating position for the fuel valve lever is the “ON” position. In this position, fuel
will flow to the carburetor.
“RES” Position (Reserve)
If the fuel level in the fuel tank becomes too low for the engine to operate with the fuel valve lever
in the “ON” position, turn the lever to the “RES” position to use the reserve fuel supply, and refuel
as soon as possible.
“OFF” Position
The closing position for the fuel valve is the “OFF” position. When the vehicle is not in use, always
make sure the petcock is in the “OFF” position.
N. Chassis
Grease chassis bushings and bearings with grease every six-months to assure smooth operation
and extended life of the bushings and the components. If used in extreme wet, muddy,
or dusty conditions, greasing is recommended more often.
33
To Next Page
Loading...
