P. Steering Gear Box and Ball
HEAD AND STEERING GEAR BOX
a. Remove four bolts on LH and RH clamp nut
and steering gear box.
b. Remove and check ball head dust cover and
steering gear box for wear.
c. Check steering cover on sides of steering gear
box and grease the ball head.
d. Fill steering gear box with grease after cleaning
the dust. Replace the ball joint if it is loose or not
smooth.
SERVICE INFORMATION
Bolts and Nuts
Steering Gear Box
Ball Head Dust Cover
Ball Head
Ball Joint
Steering Knuckle Support
35
Spindle
To Next Page
Loading...
