Carver A-500X - 4. Unpacking and Paperwork; Important Ownership Documentation

1M Distortion:
SMPTE
<
0.03%
CCIF
< O~01 %
THO:
< 0.08%
Signal-to-Noise Ratio: > 117 dB
A-weighted, referenced to rated power
> 93 dBW
A-weighted, referenced to 1W
Power Consumption:
50W at idle
330W with musical program
880W at full power into 8 Q (continuous)
Power Requirements:
120VAC/60Hz (USA and ·Canada)
Other voltages as required for export
Display:
2 Analog Meters;
OdS = 250 watts into 8 n
or 25 watts into an (x10 range)
Size (H x W x D):
5.75'1 x 19·· X 18.8
11
146mm x 483mm x 478mm
with handles
5.75" x17
1f
x 17.8"
146mm x 432mm x 452mm
without handles
Net Weight:
29 Ibs. (13.2 kgs)
Shipping Weight:
34 Ib·s. (15.4 kgs)
Features and specifications are subject to
change without notice.
.. < A~5()Ox·<'
, . I.": ,'-
4. Unpacking and
Paperwork
Carefully unpack your A-SOOx and keep the
original carton and packin'g materials for
future moving, shipment or long-term
storage~
After opening the box, please check for any
visible signs of damage that were not apparent
from the outside of the box. If you do encoun-
ter what appears to be concealed damage,
please consult your Carver Dealer before
proceeding to further unpack or install the
unit.
Important Paperwork
Make sure to save your sales receipt.
Your receipt is extremely important to estab
w
lish the duration of your Limited Warranty}
and for insurance purposes. Next, make a note
of the serial number which is located on the
back of the amplifier. Record it in the space
provided below for convenient reference ..
Model: A-500x
Serial Number: _
Purchased at:
----0-..----
Date: _
Finally, take a moment to fill out the Cus-
tomer Registration Card packed with the
amplifier and return it to Carver .. This allows
us
to keep you informed of new products and
technologies as they become available.
e