CARVIN POOL EQUIPMENT INC.
Garantie limitée
Carvin Pool Equipment Inc. ("Carvin") warrants “Carvin” pool
products to be free of defects in material and workman-
ship for a period of 24 months fromthe date of purchase
with the following exceptions:
Light Bulbs: Full Moon Watercolor LED light bulbs are
warranted for 12 months from the date of purchase;
incandescent bulbs are warranted for 90 days from the
date of purchase.
Miscellanious: Filter elements, DE grids, white-goods,
tube”, pressure gauges, square rings, o-rings, gaskets,
and all re-placement parts are warranted for 12 months
from the date of purchase.
Chlorine Generation System: Salt Chlorine generation systems
are covered by a limited warranty of 24 months; 100%
date of purchase.
StarLight/StarBright/StarWhite: The LED light is warrantied for a
period of 24 months. The remote control and the AC adapter are
warrantied for 12 months from the date of purchase.
CONDITIONS IN ORDER TO EXERCISE THE WARRANTY
In order to activate this 24 months warranty, ‘’Carvin
products must registered with ‘’Carvin’’ by either of the
following methods:
1- Mail-in Warranty Registration Card
2- Online at, www.carvinpool.com
All defects must be denounced within 72 hours in order to
avoid the spreading to other equipment, failing which; the
present warranty will not be honour ed. This warranty is non
transferable and extends only to the original retail buyer and
only during the time in which the original retail buyer
occupies the site where the product was originally installed.
‘’CARVIN’’ warranty obligation with regard to equipment
which it does no itself manufacture is limited to the warranty
actually extended to ‘’CARVIN’’ by its suppliers (i.e. motors).
This warranty applies to products used in swimming pools,
spas, & aquaculture applications only and does not apply to
any
product which has been subjected to negligence,
alteration, accident, abuse, misuse, improper installation,
abrasives, corrosion, improper voltage supply, vandalism,
civil disturbances, or acts of God (including but not limited
to damage caused by freezing, lightning strikes, and other
damage caused by catastrophic events). The only warranties
authorized by ‘’CARVIN’’ are those set forth herein. ‘’CARVIN’’
does not authorize other persons to extend any warranties
with respect to its products, nor will ‘’CARVIN’’ assume
liability for any unauthorized warranties made in connection
with the sale of its products. ‘’CARVIN’’ will not be responsi-
ble for any statements that are made or published, written or
oral, which are misleading or inconsistent with the facts as
‘’CARVIN’’.
WARRANTY CLAIM PROCEDURE
Warranty claims shall be made by contacting the
installer/seller, builder, dealer, or retailer (point of purchase)
or the ‘’CARVIN’’ pool products distributor in your area. All
equipment must be inspected by a local ‘’CARVIN’’
authorized representative or at the factory before warranty
is authorized. All charges or expenses for freight to and
from the factory, removal and reinstallation of the products,
or installation of a replacement product are the responsibili-
ty of the purchaser unless otherwise expressly authorized in
writhing by ‘’CARVIN’’. ‘’CARVIN’’, at its discretion, may repair
or replace free of (F.O.B. factory in St-Hyacinthe, Québec,
Canada) any product that proves defective within the
warranty period, or it may issue credit in the amount of the
invoice of
the defective equipment in lieu of its repair or
replacement. . ‘’CARVIN’’ reserves its right to substitute new
or improved equipment on any replacements.
REV-F
6
FIG NO. PIÈCE NO. DESCRIPTION
M22904246
WWW.CARVINPOOL.COM
Replacement Parts (Fig. 9)
FIG NO. PIÈCE NO. DESCRIPTION
1
42-1679-70-R
Strainer nut (1/4 turn)
2 39-0789-03-R
Strainer cover
3 47-0352-41-R
Strainer cover O-ring
4 16-1052-15-R
Strainer basket
5 16-1102-12-R
Strainer body 12 O’ clock discharge 1-1/2”
6
7
8
9
9
10-1462-07-R
11
5a 16-1102-90-R
Strainer body 9O’clock discharge 1-1/2”
10
12
13
14
15
16
17
18
19
20
20A
14-4361-17-R4
47-0225-04-R
31-1587-02-R
31-1609-06-R2 Drain Plug with O-ring ( 2 Per Bag)
47-0361-08-R
05-3760-09-R
05-3759-02-R
05-1234-05-R
05-3853-07-R
02-1347-51-R
23-4857-09-R
23-4856-00-R
47-0214-06-
R
06-0517-39-R
10-0802-08-R
22-3403-05-R
Shark Strainer Body Main O-ring
Floating eye se
al
Impeller for 3/4 hp motors
Impeller for 1 hp motors
Impeller for 1.5 hp motors
Impeller for 2 hp motors
Shaft mechanical seal
Motor Bracket US for above ground pool pump
Hex Cap Machine Screw 3/8-16 x 1’’
- StnStl 316 (4 per bag)
Flinger
Motor ( Ask your local pool retailer)
Stainless steel (316) nuts 3/8 - 16 x 21/64 Thk . (4 per bag)
9 O’clock connector
9 O’clock connector O-ring
6 Ft. Cord with regular 3 prong plug
3 Ft. Cord with twist lock plug
14-1296-13-R4
-
To Next Page
Loading...
