9
When the weight is not
stable, press the HOLD key.
Remove the commodity
from the platter.
Display will show the
“HOLD”.
The display will show the
average weight 10 times.
3. Hold Function (AD 2.5, 5, 10, 25kg, ADH Series)
8
1. General Weighing
Wait until display should be zero.
Place the commodity on
the platter.
Remove the commodity from
the platter.
Remove the commodity from
the platter.
Remove the container from
the platter.
Press TARE key.
Place the container on the
platter.
Press TARE key. Place the commodity on
the container.
2. Weighing with Tare
OPERATIONS
Turn on the display by pressing ON/OFF key.
Then the display will show all the segments and count up "0" to "9".
When you turn on the display, make sure that platter is empty.
The display indicates if the scale is at ZERO or if there is a TARE entered
into the scale by way of a ZERO and NET lamps.
When the display is not zero though there is nothing on the platter, press
the ZERO key.
In case of AD-2.5, AD-05H the display shows zero state as 0.0.
To Next Page
Loading...
