CAS EB-WS-6 - Chapter 3. Users Set-Up Mode

1
8
Chapter 3. User’s Set-up Mode
This section explains how to set up the following functions.
Functions Options Remarks
1. Auto power-off NO / 10 / 30 / 60
2. LCD Backlight On/OFF OFF / ON / 3 / 5 / 10
3. Backlight Bright control 1 ~ 7(defualt 3)
4. Low Battery Backlight On/Off BL-on / BL-off
5. Printer selection NON/DEP-50/DLP-50
1) To get into “User’s Set-up Mode” press ON/OFF key pressing and holding
ZERO key.
+
■ Press “ZERO” key to save current option and move to next function setting mode.
■ Press “TARE” key to move to other next option.