CAS EB-WS-6 - Page 36

3
7
f. Calling up or deleting total amount
■ When you just check total amount.
1) Press “∑” key just to check total amount.
Ex) Total amount=115.00, Total number of transaction= 5.
● The scale beeps when there is no adding-up transaction.
2) Press “+” key to go to normal “0” point mode.
■ When you delete total amount.
1) Press “∑” key just to check total amount.
Ex) Total amount=115.00, Total number of transaction= 5.
● The scale beeps when there is no adding-up transaction.