8-2. Auto Print
① To use auto print function, you have to set printer menu to “Pr AUt” in setup mode.
Refer to Setup Mode Table on page 19.
② If the weight is stable, it is printed out automatically.
And You can print out data every time pressing the PRINT key.
8-3. Stream Print
① To use auto print function, you have to set printer menu to “Pr Str” in setup mode.
Refer to Setup Mode Table on page 19.
② If the weight is stable, it is printed out continually
9. Battery Charge
■ Warning massage is shown when the battery voltage is very low. ( )
■ At this time, charge the battery. (a charging battery only)
■ The display will show a red lamp and the battery will begin a fast charge automatically.
- Use only the ac adapter which comes with the scale. Other AC adapter may cause damage.
10. Unit conversion (Kg, lb, oz)
① Press press 5 on MODE key at
weighing mode. The display shows
“U kg” (or your last unit)
② Use “HOLD key” or “PRINT
key” you can set which unit you
want to use. Kg, lb, oz.
③ Press “SET key” and
“CHAnGE” will display.
④ Press the “MODE” key to go
to the weighing mode.
※ If the tare is set, scale cannot change the unit.
To Next Page
Loading...
